CAMD Forklift Safety Test Instructions:

Please enter your personal information in the spaces below. A minimum passing score is 80% (8 out of 10) This test can only be taken once in a thirty day period. All fields are required to be filled in.

Login:
First Name:
Last Name:
Phone Number:
Contact:

1. When carrying a load, always:a. tilt the load forward. b. center the load c. carry the load as high as possible d. none of the above

2. The weight limit for the CAMD forlift is:a. one ton b. two tons c. 3000 lbs d. 5000 lbs

3. When lifting a heavy load or prolonged forklift activity, you should make sure that the charge is at least:a. 1/4 full b. 1/2 full c. 3/4 full d. full

4. When moving a load you should always:a. lower forks as much as possible b. tilt load backwards c. make sure travel path is clear of obstacles d. all the above

5. When approaching a load the driver should:a. stop about one foot from the load b. ignore people around the load c. go right up the load d. none of the above

6. If you find that the fork lift lifts while trying to pick up a load you should:a. back up a little from the load and attempt to lift again b. add people to the back of the fork lift to increase the weight c. extend the forks (to increase their length) d. immediately cease lifting procedures

7. While driving a load you should never:a. drive with the load tilted backwards b. drive blindly c. drive with the load in a lowered position d. drive with the lights on

8. The first thing you should do before moving the forklift is:a. put on your seat belt b. check the horn c. check the battery charge d. release the brake

9. If the space is too narrow to engage both forks you should:a. engage a single fork provided the load is not heavy and move it to a more open location nearby to engage both forks and complete the lift b. pile the load loosely on top of a pile of similar items c. tilt the forklift mast forward to get a better grip on the load d. off-center the load so that the load can be tilted

10. When lifting a load:a. always use a person to stand in front of the stacks to ensure proper load handling b. it is permissible to lift persons on the forks c. it is still possible to make a safe lift even if the pallet on which the load sits is broken d. start by engaging forks completely through the pallet width or length